Accesories

Bad Boy CF Landing Gear:
Lightweight rugged woven texture carbon Fiber landing gear. The landing gear is pre drilled in the factory. Just bolt on and go fly.

 

Bad Boy CF Wheel Pants:
Enhance your Model with the sexy and robust Carbon fiber wheel pants. Your model deserves better!

 

Badboy Fiberglass Wheel Pants:
High gloss FG lightweight wheel pants.

 

CF Servo Arms

Get the most out of your airplane!  If your airplane features extremely large control surfaces, the load on the servos will flex the plastic spline. To get the full movement and maximum throws we offer an extension servo arm which is easily installed on top of the supplied servo arms. The CNC machined carbon fiber arms are stiff and will not flex, allowing you to get the most out of your airplane! 

Features

  • Extremely heavy duty
  • Snap installation
  • No glue required
  • Extrmely lightweight
  • absolutly no flex allowing the usage of ball links
  • Best solution for maximum throw in 3D funfly models
  • CF woven awesome look!
  • Can be used on all brand servos
  • Hardware and instruction are included
  • Accurately CNC machined in our facility

Heavy Duty Extension Lead

Giant scales have significant voltage lost caused by poor cables and connectors while drawing high amp through long leads – which means lower performance from your servos. In other words, your servo “sees” less voltage than what your Rx pack has.
We use the biggest diameter cables that Rx connectors can handle. These extensions are designed for use on giant scales but of course they will be perfect for any smaller model.
After long searching for the ultimate extension leads for use on giant scales, we have decided not to compromise on the quality and produce the highest quality extension leads to meet our standards.
100% German made (including the cable connectors and workmanship) and they’ve got it all!
Thickest gouge coated cables for the lowest resistance and minimum voltage drop in long extensions. Cables are twisted and extremely flexible to avoid RF interference. Gold plated lock type connectors for the best conductivity that can handle higher amps.
Each lead packed individually in a tough plastic sealed box to avoid any damage.
All extensions have JR connectors (male + female) that will fit Hitec as well (not Futaba).
Our connectors can handle higher amp than the JR/HITEC connectors available on the market and they are lock-type connectors for extra safety.

BMS-380MAX 16g Micro Servo


  • Weight: 16.4g / 0.58oz
  • Size(mm): 26 x 13 x 26 mm
  • Size(inch): 1.16 x 0.51 x1.02 inch
  • Speed: 0.15sec / 60 deg at 4.8V
  • Torque: 4.1kg/cm , 57 oz/in at 4.8V
  • Ball bearing: Single
  • Gear type: Metal Gears

BMS-306BB 6g Micro Servo

These servos offer high torque (1.1kg), high speed (0.10 sec) and are very light weight (only 6.5g including the connector and the wire). Other servos are heavier and may offer the same torque at lower speed. Keep in mind that each gram counts when considering the all up weight of the model.  

  • Weight: 6.2g / 0.21oz
  • Size: 22 x 10 x 23 mm
  • Size: 0.86 x 0.4 x 0.9 inch
  • Speed: 0.11sec / 60 deg at 4.8V
  • Torque: 0.8kg/cm , 12 oz/in at 4.8V


Click here to go to the spare parts page for the Bad Boy V2